AGRU Kunststofftechnik GmbH supplied a total of more than 1,000 m of PE 100-RC piping including fittings and a total of 2,880 m of PE 100-RC pipes and...Далее
AGRU customers realized the replacement and installation of a ECTFE SK+ dual-laminate chimney stack for sulphuric acid fumes for a sulphuric acid plant
|Project||Replacement of a ECTFE SK+ dual-laminate chimney stack|
|Location||Rio Seco in Peru|
|Dimension||DN 500 mm with a height of 60 m|
|Products||ECTFE SK+ fabric backed sheets, cap-strips and welding rod|
|Media||Sulphuric acid fumes|
The purpose of this project was the replacement of a chimney stack for a sulphuric acid plant at Rio Seco in Peru. When processing the occurring flue gases, aggressive media can form as a by-product. Since these media are very corrosive to metals and many other plastics, a dual-laminate solution using ECTFE SK+ liner material and fibre reinforced plastic (FRP) is in action. Applications made of fibre-reinforce plastics are lined with fabric backed sheets to maintain chemical resistance and leak-tightness. The FRP ensures the compressive and mechanical strength needed for a safe operation of the system, even under vacuum.
The job site team built and installed the replacement of the chimney stack. As part of the project preparations AGRU has had the pleasure to welcome their customers in February 2020 in Austria for a welding training and technical discussions. The resulting cooperation was responsible for further communication with the application engineering team of AGRU during each project phase.
One of the most discussed technical challenges of this project was the conceptualization of a Y-Tee on the chimney stack. While the three dimensional geometrical form was already very demanding for the preparation of the welding process, a welding from the inside was practically impossible because of the inner diameter of 500 mm. Therefore the outer welding had to be done very carefully to ensure leak-tightness and enough mechanical strength.